My model C9 9mm is jammed The slide is stuck and the magazine is stuck What should I do
- Unload the firearm. This is the most important step, as it will ensure that the firearm is safe to handle. To unload the firearm, point it in a safe direction and remove the magazine. Then, pull back on the slide and eject any rounds that may be in the chamber.
- Try to clear the jam by hand. Once the firearm is unloaded, you can try to clear the jam by hand. To do this, use your fingers to feel for any obstructions in the chamber or magazine. If you can remove the obstruction, the firearm should be able to function normally.
- Use a cleaning rod to clear the jam. If you cannot clear the jam by hand, you can use a cleaning rod to try to remove the obstruction. To do this, insert the cleaning rod into the chamber and push it forward until it reaches the obstruction. Then, pull back on the cleaning rod to remove the obstruction.
- Lubricate the firearm. If the firearm is still jammed, you can try lubricating it. To do this, apply a small amount of lubricant to the chamber, slide, and magazine. Then, try to cycle the firearm several times to see if the jam has been cleared.
- Take the firearm to a gunsmith. If you cannot clear the jam yourself, you should take the firearm to a gunsmith. A gunsmith will be able to safely and effectively clear the jam and repair any damage that may have been caused.
Related Questions
- How do I prevent my firearm from jamming? Keep your firearm clean and lubricated, and avoid using ammunition that is not compatible with your firearm.
- What are the different types of jams? There are several different types of jams, including stovepipes, double feeds, and failure to eject.
- How do I clear a stovepipe? To clear a stovepipe, pull back on the slide and eject the spent casing. Then, insert a fresh round into the chamber and close the slide.
- How do I clear a double feed? To clear a double feed, remove the magazine and eject the rounds that are jammed in the chamber. Then, insert a fresh magazine and close the slide.
- How do I clear a failure to eject? To clear a failure to eject, pull back on the slide and eject the spent casing. Then, insert a fresh round into the chamber and close the slide.
Related Products
- Glock 19 Gen 5
- Sig Sauer P320 XFive
- Smith & Wesson M&P9 Pro
- CZ P-10C
- Walther PPQ M2
Pre:How impressive was Lex Luger as an all around athlete in professional wrestling
Next:How do I get rid of a bra bulge fast