Why do my brake lights work but not my tail lights? I do have a hole in my bypass tube.
If you're experiencing this issue, it's likely due to a faulty brake light switch. The brake light switch is responsible for sending a signal to the taillights when the brake pedal is pressed. If the switch is faulty, it won't be able to send the signal, and the taillights won't illuminate. In some vehicles, the brake light switch is integrated into the bypass tube. If the bypass tube has a hole, it can allow moisture to enter and damage the brake light switch. This can also cause the taillights to stop working.
To fix this issue, you'll need to replace the brake light switch. This is a relatively simple repair that can be done in about an hour. Here's a step-by-step guide on how to do it:
- Gather your tools. You'll need a new brake light switch, a socket wrench, and a flathead screwdriver.
- Locate the brake light switch. It's usually located on the firewall, near the brake pedal.
- Unplug the electrical connector from the brake light switch.
- Use the socket wrench to remove the old brake light switch.
- Install the new brake light switch.
- Plug the electrical connector into the new brake light switch.
- Test the brake lights.
If the brake lights are now working, you're all set! If they're still not working, there may be another issue with the taillights. You may need to check the taillight bulbs or the taillight wiring.
Related Questions
- Can I fix this issue myself? Yes, this is a relatively simple repair that you can do yourself.
- How long will it take to fix this issue? It should take about an hour to replace the brake light switch.
- Do I need to replace the bypass tube as well? If the bypass tube has a hole, you should replace it as well. This will prevent moisture from entering and damaging the brake light switch.
- What are some other causes of taillight failure? Taillight failure can also be caused by faulty bulbs, damaged wiring, or a blown fuse.
- How can I prevent taillight failure? You can prevent taillight failure by regularly checking the bulbs and wiring, and by replacing them if they show signs of damage.
Related Hot Sale Products
- Osram Original Line Brake Light Bulb
- Philips Automotive Lighting Standard Headlight Bulb
- Wagner ThermoQuiet Ceramic Disc Brake Pad Set
- Bosch QuietCast Premium Disc Brake Rotor
- ACDelco GM Original Equipment Brake Shoe
Pre：How do you start a diesel engine after running out of fuel
Next：Does the Orient Express still run from Paris to Istanbul How much is it in Australian dollars